500GF-Nk Gas Generating Set 190 Series Gas Engine Hand Oil Pump 286L. 29.00

• Conditions of Use: Car Type, Trailer Type, Marine, Land Use
• Usage: Emergency Crew, Standby Unit, Common Units
• Output Type: AC Three Phase
• Cooling Method: Water Cooling
• Installation Method: Fixed
• Generator Type: Diesel Generator
• Model NO.: 286L. 29.00
• Pressure: 0.2~0.25MPa
• Certification of Products: ISO9001
• The Cylinder Diameter: 190
• Transport Package: Export Wooden Case
• Trademark: hongfan
• Origin: Jinan, Shandong, China
• HS Code: 8409999000
• Production Capacity: 10000pieces/Year

Product Description

diesel engine maintenance
Good maintenance is an important guarantee for diesel engine to work normally and reliably and extend its service life. During the use of diesel engine, users should strictly follow the following technical maintenance items. Do a good job of maintenance. Its specific maintenance requirements and implementation cycle, according to the diesel engine service status and environmental conditions, appropriate adjustment.
(1) day maintenance
The operator of each shift must carefully fill in the operation record of the shift (see Appendix III), and record in detail the parameters of the diesel engine running condition, the faults found and the measures taken. The following work shall be completed:
(1) Check the fuel tank oil level.
(2) Check the oil level of oil pan, fuel injection pump, governor, whether there is abnormal increase or decrease phenomenon, and check the oil quality condition. Add oil if necessary.
(3) Check the water level in the expansion tank or cooling pool, and add cooling water and rust prevention liquid if necessary.
(4) Check the air source pressure. When using electric motors, check the charging condition of the power supply.
(5) Wipe the surface of diesel engine.
(6) Check whether the instrument is normal.
(7) Monitor the working parameters of the diesel engine indicated by the instrument, and pay special attention to the changes in oil pressure and oil and water temperature.
(8) Observe diesel engine exhaust condition, monitor diesel engine sound. If abnormal phenomenon is found, the cause should be found in time to eliminate.
(9) Check and eliminate oil leakage, water leakage and air leakage of diesel engine, and keep the appearance and environment of diesel engine tidy and clean.
(10) Check the connection of diesel engine and the fastening of fixed parts.
(two) week maintenance
The diesel engine runs for every week. Technical maintenance of the following items shall be carried out;
(1) Complete all items specified in daily maintenance.
(2) Check and clean the air filter.
(3) The oil gun to the fuel injection pump oil volume adjustment tooth rod injection oil, so as to avoid corrosion.
(4) Discharge the water in the gas tank.
(5) Discharge the water and sediment in the fuel tank and fuel filter.
(6) Clean the respirator filter element.
(3) monthly maintenance
After every month of operation of diesel engine, technical maintenance of the following items should be carried out:
(1) Complete the daily and weekly maintenance projects.
(2) Clean the fuel filter.
(3) Check the oil filter inlet and outlet pressure difference, if the large dry 196kPa, should replace the paper filter element.
(4) Add No. 3 graphite lithium base grease to the transmission device of the injection pump and the connector, add calcium base grease to the pneumatic motor and add oil to the oil mist (see Appendix II for details).
(5) Check the electric starting motor brush. And remove carbon from the commutator.
(6) Check and adjust the valve clearance.
(7) Check and adjust the feed advance Angle of the fuel injection pump.
(8) Check the injection pressure of the injector, observe its atomization quality, and clean the injector or adjust the injection pressure.
(9) Check and clean the air filter.
(10) Check the sensor of the alarm device of the instrument monitoring system.
(11) After 250 hours of operation of the new machine, check the fastening of the cylinder head nut and the fastening of the bolts between the exhaust pipe and the cylinder head.
(12) Check the corrosion of anticorrosive zinc blocks (rods and rings) such as oil coolers, intercoolers and freshwater coolers, and replace them if necessary.
(13) Land machine: check and adjust the tensioning condition of fan drive tape.
(four) seasonal maintenance
Diesel engine in the winter, summer operation before the handover, should be carried out seasonal maintenance. The specific time should be determined according to the local climate conditions. The maintenance items are as follows:
(1) Completion date. Weekly and monthly maintenance of specified items.
(2) Clean all cooling systems. Cold areas into the winter should take heating and insulation measures (such as battery and insulation layer). Switch to antifreeze if necessary.
(3) Clean the lubrication system, check the oil quality of diesel engine oil, and replace the oil when necessary.
(4) Clean the fuel tank and replace it with the corresponding brand of diesel according to the seasonal change.
(5) Clean the oil and carbon accumulation in the volute and impeller of the supercharger compressor.
(6) Verify all instruments and instrument monitoring and alarm devices.
(7) Check the starting device.

 

 

 

no	num	name
1	12VB.01.141	Throttle valve
2	12VB.01.05	bushing
3	12VB.01.146	Gasket for sealing
4	12V.01.12	Sealing rubber ring
5	12V.01.09	Cross water pipe
6	12VB.01.23A/24A	Upper and lower spindle tile
7	12VB.01.82	Water pump gasket
8	12VB.01.34	Camshaft bearing bush
9	12VB.01.21A/22A	Push down the spindle tile
10	12V.01.14	Cylinder liner sealing rubber ring
11	12VB.01.134	Sealing rubber ring on cylinder liner
12	12VB.01.136	Cylinder liner sealing ring
13	12V.01.02C	Cylinder liner
14	206L.01.31	Cylinder head gasket
15	12VB.01.03	Cylinder head gasket
16	12VB.01.45	Observe the cover liner
17	Z12VB.01.81C	Supercharger support
18	Z12VB.01.85	Exhaust main bracket
19	12VB.01.31A	Main bearing nut
20	12VB.01.29B	Main bearing bolt
21	12VB.01.25A	Thrust back plate
22	12V.01.09	Cross water pipe
23	12VB.01.04B	Cylinder head bolts
24	12VB.01.07A	Cylinder head nut
25	12VB.01.131	Cylinder head bolt washer
26	12VB.03.00	Cylinder head unit
27	12VB.03.10.20-GJ	Exhaust rocker arm coupling
28	12VB.03.10.10-GJ	Intake rocker arm coupling
29	12VB.03.10.10.02	Rocker arm bushing
30	12VB.03.10.07	Rocker arm convex head
31	12VB.03.09B	Rocker arm seat bolt
32	GB93 14	The gasket
33	Q/JC11013 M14*1.5	nut M14*1.5
34	12VB.03.04	Short length bolt
35	12VB.03.47	bolt
36	12VB.03.80.06	Jacket for oiler
37	12VB.03.80.04	Exhaust valve seat
38	12VB.03.80.05	Intake valve seat
39	12VB.03.22/37	Inlet/exhaust valve
40	12V.03.21A	The catheter
41	12VB.03.15A	Spring upper seat
42	12VB.03.19	Spring lower seat
43	Z12V.03.17B	Valve internal spring
44	Z12V.03.18B	Air door spring
45	601.03.16A	Air door lock clip
46	12VB.03.30B	Rocker arm convex head
47	12VB.03.90B	Rocker arm cross bridge adjustment screw
48	12VB.03.03B	Rocker arm cross bridge
49	12VB.03.60B	Rocker arm adjustment screw
50	GB6173 M14*1	nut M14*1
51	GB5782 M8*30	nut M8*30
52	GB848 8	Washer 8
53	12VB.03.02	Upper cover shell
54	12VB.03.11	Sealing ring
55	12VB.03.12A	Seal ring
56	12VB.05.09C-GJ	Piston gas ring binding piece
57	12V.05.08A	Piston pin
58	12V.05.14	circlip
59	Z12VB.05.01C	The piston
60	12VB.05.10.09	Connecting rod nut
61	12VB.05.10.06	Spring spring washer
62	12VB.05.10.04/05	Upper and lower connecting rod bearing bush
63	12VB.05.10.07	Positioning pin
64	12VB.05.10.03	Connecting rod bolt
65	12VB.05.10.08C	Small head bushing
66	12VB.05.10/PJ	Connecting rod set
67	12V.07.04A	Shock absorber components * Sealing ring
68	12VB.07.03	Shock absorber components * Sealing ring
69	12VB.44.01	Connector parts * Ring teeth
70	Z12VB.06.10.03B	Camshaft and gear system components * Roller shaft
71	Z12VB.06.12	Camshaft and gear train components * sleeve
72	Z12VB.06.13	Camshaft and gear train components * separation ring
73	Z12VB.08.10.03A	Intake pipe component * gasket
74	12VB.08.10.14	Intake pipe component * gasket
75	Z12VB.09.13B	Air exhaust main
76	Z12VB.09.14	Exhaust pipe components * gasket
77	Z12VB.09.10A	Bellows Z12VB.09.10A
78	Z12VB.09.47X	Exhaust pipe components * gasket
79	Z12VB.09.30	Corrugated pipe
80	Z12VB.09.06A	Exhaust branch gasket
81	Z12VB.09.16	Exhaust pipe components * screws
82	Z12V.09.45A	Exhaust pipe components * Nuts
83	Z12VB.09.04A	Exhaust pipe gasket
84	Z12VB.09.04B	Exhaust pipe gasket
85	Z12VB.09.20A	Bellows Z12VB.09.20A
86	Z12VB.09.05A	Exhaust pipe components * gasket
87	12VB.11.00	Rotor type oil pump component
88	235.11.00	Gear type oil pump components
89	12VB.10.06	Fuel filter components * Rubber ring
90	12V.10.30A	Diesel filter element - Paper
91	12VB.36M.40/50	Air filter
92	Z12V.12.30A	Plunger couple parts
93	Z12V.12.20	Outlet valve coupling assembly
94	Z12V.12.00	Fuel injection pump unit
95	Z12V.12.13	Plunger spring upper seat
96	Z12V.12.14A	Plunger spring
97	Z12V.12.16	Plunger spring lower seat
98	Z12V.12.01A	Oil outlet valve bushing
99	Z12V.12.02A	Oil outlet valve tight seat
100	Z12V.12.03A	Outlet valve spring
101	12VB.16.00E	Fuel injector
102	12V.16.20E	Oil injection nozzle
103	12V.16.15A	Fuel injector assembly pad
104	129.13.00	Mechanical governor parts
105	12VB.14.10	Left row high pressure oil pipe section
106	12VB.14.20	Right row high pressure oil pipe section
107	12VB.14.30.10B	Return pipe parts
108	12VB.14.50.20	Return pipe parts
109	12VB.14.220A	Intermediate hose
110	12VB.14.60A	Filter return pipe
111	223.17.00	Oil pump components 223.17.00
112	12V.17.00	Oil pump components 12V.17.00C
113	12VB.54.00D	Pre-supply oil pump 12VB.54.00D
114	22 -850 JB984-77	Type A buckle hose joint
115	22 -710 JB984-77	Type A buckle hose joint
116	12V.29.00	Oil pump parts for hand machine
117	12VB.18.10B	Oil filter
118	Q/JC12003 70*5.7	Rubber ring 70*5.7
119	12VB.19.00	Centrifugal filter assembly
120	12VB.20.120	Overspeed safety device inlet pipe
121	12VB.20.02	O-ring for oil cooler
122	Q/JC14006 51*82	Gasket 51*82
123	12VB.22.00B	Water pump component 12VB.22.00B
124	223.22.00	Cryogenic water pump component 223.22.00
125	SB-34	Mechanical seal
126	PG35*62*12HG4-692-67	Skeleton type rubber oil seal PG35*62*12
127	12VB.21.00	Oil cooler
128	12VB.21.05	Seal ring
129	12VB.21.08	Oil cooler inlet and outlet pad
130	12VB.21.01	Oil cooler parts * gasket
131	12VB.27.00	Intercooler components 12VB.27.00
132	12V.27.00	Intercooler components 12v.27.00
133	12VB.47.19	hose
134	12VB.47.120	clamp
135	PZ12VB.24.11	Hose connection
136	PZ12VB.24.09	Hose connection
137	12VB.24.13	Pipe joint
138	P12V.24.04	3" hose
139	PZ12VB.24.08	Hose connection
140	PZ12VB.24.10.02	hose
141	PZ12VB.24.80	clamp
142	PZ12V.24.310	Pipe clamp
143	PZ12VB.24.70	φ34 double wire clamp
144	PZ12V.24.300	Pipe card parts
145	12VB.35.00	Control unit unit
146	161.35.00A	Remote control device
147	12VB.46.14	Start up switch
148	12VB.46.03	ST710 Start motor
149	12VB.46.110X	12VB.46.110X motor
150	12VB.46.120F	Air starting motor
151	701.46F.60	G12V gas starting motor
152	Z12VB.26.00-1A	J170-2 supercharger
153	2012.26.00	SJ160 supercharger
154	20GJ.00EA	supercharger
155	129.34.00A	Low oil pressure automatic stop unit
156	12VB.37.00	Overspeed safety device
157	12v	The whole car gasket

 

Oil return screw 12VB.14.30.01A
Nozzle press plate 12VB.03.44
Fuel injector jacket 12VB.03.80.06
Intake valve seat 12VB.03.80.05
Exhaust valve seat 12VB.03.80.04
Valve catheter 12VB.03.80.02
Intake and exhaust tappet parts Z12VB.06.20A
Spring upper seat 12VB.03.15
Valve buckle tile 12V.03.16A
Adjusting screw 12VB.03.90B
Piston Z12VB.05.01C
Piston gas ring 12VB.05.09B
Piston gas Ring 12VB.05.11
Spring combined oil ring Part 12VB.05.20
Circlip spring 12V.05.14
Cylinder liner 12VB.01.02C
Water Pump 12VB.22.00B
Start the motor
Rocker arm 12VB.03.10.05A
Rocker arm cross bridge 12VB.03.03B
Gasket 12V.16.20E
Gasket 12V.16.02
Oil outlet valve Z12V.12.20
Oil seal Z12V.12.04
Embolization spring Z12V.12.14A
Embolization spring upper seat Z12V.12.13
Embolization spring lower seat Z12V.12.16